Pintek Products Differential Probe DP-15K ( 15KVp-p/75MHz ) DP-15K is a 100mV high sensitivity and able to measure 15KVp-p high voltage and high dynamitic range model. Bandwidth is able to reach 75MHz. DP-15K is an upgraded model of DP-14K. The sensitivity is 2 times of DP-14K. The maximum measuring voltage is 1KV higher than DP-25 (1300Vp-p) Input impedance is 50M ohm, loading effect is even smaller (DP-25 is 4M ohm). It is suitable for measuring high impedance circuit and green power saving circuit. All ranges are using 10 multiple calculation, easy calculation. It is able to reset the attenuation at oscilloscope readout menu. It is very convenient. Detachable design, patent no. 114205. It is handy and convenient to use. Full accessories, including adaptor. Discard unrecyclable batteries. Input and output are fully isolated design. No matter how large is the input current, the output voltage is still under +/- 8V. This is very safe. When voltage is over range, the red LED will light no. This is reminding users to increase attenuation or stop measuring. Internal voltage stabilizer system is from DC 5V ~ DC 12V. More Spec DM1 DM2 MAG Manual Differential Probe Selection Guide Please write down your comment on this product, and click Add to Inquiry List for inquiry Add to Inquiry List Review Inquiry List Back