•  
  • MODEL:PL-10  IMPEDANCE:1.111MΩ   ACCURACY: ±0.25%  FREQUENCY B.W.:DC~50MHz   WORKING POWER:MAX. 1Watt   INPUT VOLTAGE:MAX.250VDC or 200V rms AC   DIMENSION:46mm(L)xΦ16mm(D)   WEIGHT:25g    APPLICATION:Matching the impedance of the Scope probe with the DMM. wiht this converter, the user can use the oscilloscope to watch the wave from...

    More

  •  100:1 scope probe  300MHz Bandwidth  Read out Function Division Ratio x 100 100MΩ Fix Input Impedance  1500V DC Working Voltage  (CAT Ⅱ) 2000V AC peak to peak MAX.  (CAT Ⅰ) CE Approved. 

    More

  •  Mini Type 8KV/40MHz 1:1000 100MΩ//3PF Accuracy: DC: ≦2% to 5KV            ≦3% to 8KV AC: ≦3% at 1KV/1KHz             -3dB to 40MHz

    More

  • 10KVDC+ACpeak 100MΩ Impedance DC~120MHz 100:1, Read Out

    More

  • MAX.VOLTAGE:10KV DC. BANDWIDTH:DC~40MHz. DIVISION RATIO:X1000. SIGNAL/NOISE:>60dB(1KHz) Connect with PL-10, HVP-15HF can be used for DMM

    More

  • 18KVDC+ACpeak 200MΩ Impedance DC~100MHz 1000:1

    More

  • 28KVDC+ACpeak 500MΩ Impedance DC~75MHz 1000:1

    More

  • 39KVDC+ACpeak 900MΩ Impedance DC~50MHz(-3dB) 1000:1 for Oscilloscope Very Low Nosie

    More

  • MAX. Voltage : DC : 40KV, AC : 28KV, (50/60Hz only) CAT II. 1000MΩ Input Impedance. AccuracyDC: ± 1% to 20KV. ± 2% to 40KV.AC: -5% to -10% (50/60Hz) Division Ration : 1000:1 CE, TUV GS, UL, CUL, IEC1010 SPECIFICATIONS ( 20 ± 5℃, RH < 80% )! WARNING !Before taking any measurements, first connect the alligator clip of this probe to earth ground and make sure connection is electrically...

    More

  • Features :DC 40KV CAT II Pollution 2600MΩ Impedance25KV ± 2%, 40KV ± 3%T.C. 200 ppm/oCPositive Polarity only.Resolution 1KVNeed not power.CE、IEC1010  SPECIFICATIONS ( 20 ± 5℃, RH < 80% ) ! WARNING !?Before taking any measurements, first connect the alligator clip of this probe to earth ground and make sure connection is electrically good.Input impedance:600MΩMaximum operation voltage:40KV DC , CAT II , ...

    More

Total of 12 results